Total Cleaning MelbourneTotal Cleaning Melbourne
phone-active-3 1300 424 114

Tile and Grout Cleaning Melbourne

Retain Your Bathroom’s Former Glory back with our Tile Cleaning Melbourne Services

Total Cleaning Melbourne cleans & restore all interior floor and wall tiles from natural stone such as Travertine, Slate, Sandstone, Marble and Limestone to man-made tiles such as Ceramic, Terrazzo, and Porcelain. We use a variety of different cleaning techniques and professional specialist cleaning products depending upon the type of stone or tiled floor we are cleaning, we only use premium quality professional tile cleaning products that have been tested over a number of years and are designed to clean more effectively without being too aggressive to the surface. We can also apply our top quality sealing products which protect your floors for longer and help you maintain your floors more easily. Our cleaning and protection products are safe water-based solutions which are low odour. 

The most common service requested is shower and bathroom tile and grout cleaning. This is to address years of build of or mould and soap scum which will be cleaned and re-sealed through the process to bring this back to a clean, making it easier for you to maintain.

From light cleaning to intensive deep cleaning and renovation of all stone and floor types, we deep clean grout lines, we renovate old and worn stone floors, we clean and seal new stone floor and tiled floors. Tile and grout cleaning is one of the many professional services we offer to bring your surface area’s back to an easy to maintain standard.

Our 6 Stage Tile and Grout Cleaning Melbourne Process

We adapt the maximum of five stages procedure to clean tiles as below:

Stage One: Prespray the tiles with a professional grease cutting tile cleaner product

Stage Two: Using a special grout cleaning hand brush, clean the grout on the corners and edges of the room

Stage Three: Scrub the tiles with a rotary scrubber machine using tiles brush to remove the grease from the tiles surface and grout

Stage Four: Steam clean the tiles with a powerful 1000 psi hot water pressure and high suction extraction machine

Stage Five: Dry the floor (if needed) by using a dry mop

Stage Six: Apply Grout Sealer to seal your freshly cleaned grout (Optional extra)

The Importance of Professional Tile and Grout Cleaning in Melbourne

Grouts are porous and, as a result, they easily absorb grease, dirt and lime scale. Spillages such as  food and beverages / greasy substances and shower products will cause marks and patches in the joints of the floor. Grout between wall-tiles, particularly in damp areas like bathrooms, will become dirty and unattractive as a result of Mould and Mildew.

Mould is one of the most unsightly problems, which usually start off in the wettest area of the room, this could be the bottom of the shower or bath, then starts to spread and if left unchecked could cover a large area of the wall.

Discoloration of grout joints in bath or shower areas due to continued use of acid formulated shampoos and soaps. This causes yellow orange and pink stains to the grout over even a short period of time.

Sealing forms an invisible barrier between the grout and the surface, this will then protect your investment for years to come.

Get In Touch today via the get in touch section on our website or via phone on 1300 424 114

Get In Touch

    Carpet cleaningTile cleaningTimber Floor cleaningUpholstery cleaningFloor polishing/sealingEnd of lease cleaningGeneral/full house cleaningHigh pressure cleaningOther servicesMove out cleanVinyl floor buffing and polishingCurtains and blinds steam cleaning

    1300 424 114